9200W Barium Sulfate / PTFE

9200W Barium Sulfate/PTFE Gaskets

application:
DURLON® 9200W is a filled PTFE gasket material designed for use in aggressive chemicals. Including caustics, hydrogen peroxide, sodium hypochlorite, nitric acid, liquors and digester in pulp and paper service. Applications In the chemical, pharmaceutical and plastics industries include butadiene, hydrofluoric acid, vinyl chloride, methyl methacrylates, and styrene. It is also used extensively in railroad tankcar applications and can be used where resistance to highly aggressive chemicals is required.
DURLON® 9200W is also used for hydrofluoric acid service at moderate concentrations and temperatures or where a barium sulfate filled PTFE gasket material is specifiedwithin a temperature range of –350°F to 520°F (-212°C to 271°C), or with pressure up to 1500 psi (10.3 MPa). Style 9200W (granite white, branded) conforms to FDA requirements.
OXYGEN: DURLON® 9200W has been independently tested and certified by the Federal Institute for Materials Research and Testing, Berlin (BAM) for gaseous oxygen at pressures up to 585 psi (40 bar) and temperatures up to 392°F (200ºC), and for service in liquid oxygen. Gaskets for oxygen service can be supplied from distributor stocks, providing proper cleaning procedures for oxygen service are followed before installation.
Note: that as a class, PTFE gasket materials are not recommended in liquid oxygen services where there is THERMAL CYCLING due to thermal shock and the difference of the coefficient of expansion between PTFE and steel.

composition:
Barium sulfate fillers are homogeneously blended with pure PTFE resins to give DURLON® 9200W its physical and mechanical properties. Independent testing has shown the fillers in DURLON® 9200W to be more evenly dispersed than filled PTFE with layered construction. The result is more consistent physical and mechanical properties without the voids, separation and chemical compatibility problems found in layered filled PTFE. It is suitable for use in steel flanges, will not exhibit the cold flow problems associated with virgin or generic skived PTFE or the hardness problems of some other filled PTFE products. It has excellent sealability, cuts easily and separates cleanly from flanges after use.detail under construction

เราใช้คุกกี้เพื่อพัฒนาประสิทธิภาพ และประสบการณ์ที่ดีในการใช้เว็บไซต์ของคุณ คุณสามารถศึกษารายละเอียดได้ที่ นโยบายความเป็นส่วนตัว และสามารถจัดการความเป็นส่วนตัวเองได้ของคุณได้เองโดยคลิกที่ ตั้งค่า

Privacy Preferences

คุณสามารถเลือกการตั้งค่าคุกกี้โดยเปิด/ปิด คุกกี้ในแต่ละประเภทได้ตามความต้องการ ยกเว้น คุกกี้ที่จำเป็น

Allow All
Manage Consent Preferences
  • Always Active

Save